Dual Lens Vehicle Counting Camera

Description
Parameters

Industrial level design, special vehicle interface, to ensure reliable and stable operation of products in a complex environment;
Professional and stable special file system；
+12V ～ 36V Wide voltage design, suitable for various models;
Support 2 alarm inputs;
Good expansibility, supporting RS485 protocol docking;

Model

QH-CP040V

Material

Aluminum

System

Linux

Graphic operation interface

Various parameters of the system can be set by display screen and remote control

Language

Chinese,English,Spanish(Optional) Other (Customizable)

Alarm

2-way switch signal alarm input

Video loss, video blocking alarm

System upgrade

SD card or Computer

Power supply and power consumption

ACC on/off;

Delay shutdown

DC:+12V ~ +36V

+12V@0.5A;

Normal working state＜4W

Work environment

-20℃ ~ +70℃

10% to 90%

Dimensions

133X50X59.65mm

Weight

0.45KG

Image sensor

1/3 CCD

PAL/NTSC

Customizable

Horizontal clarity

700 TV Lines

Lens spacing

5mm

focal length

2.8 mm(2.8mm/3.6mm/4mm/6mm Customizable)

gain

automatic gain control

SNR

＞48db

input voltage

12V

White Balance

auto

Shutter

1/50-1/80000(S) 1/60-1/80000(S)

Installation height

install the equipment on the vehicle door (installation height: 2.1~2.4m, width: within1.2m)

Installation position

the label sheet (as shown below) faces inside of the room.

Installation position

Installed in the middle of the channel and above, looking straight down.

Calculation

If the vehicle has two-door, install 2 counter cameras, the counter camera will calculate and display the total number at the same time.

In order to count the number of people more accurately, we suggest that you install the equipment near the door or in the aisle where people must pass. The camera should be installed in the middle of the door or aisle.
When the camera is installed near the door, the distance from the door shall be more than 15cm; the installation position can also refer to the following figure or can also be installed at the top of the following figure, provided that the ground height and camera height are about 2.1m
CP040V 1